RF Design Engineer

1 week ago

Lockyer Valley, Australia Analog Devices Full time
About Analog Devices

Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible. Learn more at www.analog.com and on LinkedIn and Twitter (X).

About ADI: Analog Devices (NASDAQ: ADI) is a world leader in the design, manufacture, and marketing of a broad portfolio of high performance analog, mixed-signal, and digital signal processing (DSP) integrated circuits (ICs) used in virtually all types of electronic equipment. Since our inception in 1965, we have focused on solving the engineering challenges associated with signal processing in electronic equipment. Used by over 100,000 customers worldwide, our signal processing products play a fundamental role in converting, conditioning, and processing real-world phenomena such as temperature, pressure, sound, light, speed, and motion into electrical signals to be used in a wide array of electronic devices. We focus on key strategic markets where our signal processing technology is often a critical differentiator in our customers' products, namely the industrial, automotive, communications, and consumer markets.

We currently produce a wide range of innovative products—including data converters, amplifiers and linear products, radio frequency (RF) ICs, power management products, sensors based on microelectromechanical systems (MEMS) technology and other sensors, and processing products, including DSP and other processors—that are designed to meet the needs of our broad base of customers.

JOB DESCRIPTION:

The Analog/RF design engineer will be responsible for the design and verification of analog and RF/mm-wave circuits in integrated SiGe/CMOS RF/mixed signal Systems-on-Chip products.

RESPONSIBILITIES:

Primary duties will include Analog/mm-wave circuit design at the transistor level, design capture, layout, 3-D electromagnetic modeling of on-chip passives, analog/mm-wave circuits simulations and verification, documentation, test and evaluation. The design engineer should be capable of performing circuit design of mm-wave amplifiers, LNAs, power amplifiers, mixers, switches, attenuators, VGAs, vector modulators, VCOs in CMOS, and HBT technologies. Diverse design opportunities from DC to 60 GHz are available.

QUALIFICATIONS:
  • Working knowledge of Cadence, Mentor, & ADS Design, Verification & layout tools
  • Working knowledge of 3-D EM tools such as EMX or SONNET
  • Good interpersonal and teaming skills with ability to work as part of a cross-functional team
  • Good analytical and problem-solving skills
  • Position requires a B.S.E.E. degree with a preferred graduation grade of Excellent and a graduation project related to the analog/RFIC field (or relevant industry experience).

For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position – except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) – may have to go through an export licensing review process.

Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group.

Job Req Type: Experienced

Required Travel: Yes, 10% of the time

Shift Type: 1st Shift/Days
#J-18808-Ljbffr

  • Senior Electrical Engineer for RF Circuit Design

    7 days ago

    Lockyer Valley, Australia beBeeRFDesigner Full time $160,000 - $220,000

    Electrical Engineer for Analog and RF Circuit DesignWe are seeking an experienced Electrical Engineer to design, develop, and test analog and RF circuits in our integrated Systems-on-Chip products.Main Responsibilities:Analog circuit design at the transistor level, with a focus on mm-wave circuitsCapture, layout, and 3D electromagnetic modeling of on-chip...

  • RF Design Engineer

    1 week ago

    Lockyer Valley Regional, Australia Analog Devices Full time

    About Analog DevicesAnalog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate...

  • RF Circuit Design Specialist

    1 week ago

    Lockyer Valley, Australia beBeeElectromagnetics Full time $180,000 - $240,000

    Job Title: RF Circuit Design SpecialistThe RF Circuit Design Specialist will be responsible for designing and verifying analog and RF/mm-wave circuits in integrated SiGe/CMOS RF/mixed signal Systems-on-Chip products. Key responsibilities include the design capture, layout, and 3D electromagnetic modeling of on-chip passives, as well as analogue/mm-wave...

  • High-Frequency Circuit Designer

    1 week ago

    Lockyer Valley, Australia beBeeRfdesign Full time $120,000 - $200,000

    Senior RF Design EngineerAbout this role:We are seeking a highly skilled Senior RF Design Engineer to join our team. As a senior member of our engineering team, you will be responsible for designing and verifying analog and RF/mm-wave circuits in integrated SiGe/CMOS RF/mixed signal Systems-on-Chip products.Your key responsibilities will...

  • Senior Analog Circuit Designer

    1 week ago

    Lockyer Valley Regional, Australia beBeeAnalogDesigner Full time $120,000 - $180,000

    Career Opportunities in Analog Design EngineeringJob Description:We are seeking an experienced Analog/RF Design Engineer to join our team. The successful candidate will be responsible for the design and verification of analog and RF/mm-wave circuits in integrated SiGe/CMOS RF/mixed signal Systems-on-Chip products.Primary duties include designing and...

  • Senior Analog Circuit Designer

    7 days ago

    Lockyer Valley Regional, Australia beBeeAnalog Full time $180,000 - $220,000

    Job Role SummaryThis engineering position focuses on the development of analog and RF/mm-wave circuits in advanced integrated systems.Key Responsibilities:Conduct design, verification, and simulation of complex analog and RF/mm-wave circuits in cutting-edge Systems-on-Chip products.Design and implement circuit-level analog/mm-wave circuitry, including...

  • Senior RF Engineer

    5 days ago

    Lockyer Valley, Australia beBeeRF Full time $129,951 - $169,944

    About Analog DevicesAnalog Devices is a global semiconductor leader that bridges the physical and digital worlds. The company enables breakthroughs at the Intelligent Edge by combining analog, digital, and software technologies into innovative solutions.

  • Senior Analog Circuits Designer

    1 week ago

    Lockyer Valley Regional, Australia beBeeCircuitdesigner Full time $180,000 - $260,000

    About the RoleAnalog and RF/mm-wave circuit designers play a vital role in bridging the physical and digital worlds.We focus on key strategic markets where our signal processing technology is often a critical differentiator, namely the industrial, automotive, communications, and consumer markets.

  • Seinor Design Engineer

    4 days ago

    West Gippsland & Latrobe Valley, Australia Safetech Pty Ltd Full time US$90,000 - US$120,000 per year

    We're seeking a Systems Engineer / Senior Design Engineer to join our dynamic team. In this role, you'll lead the design and validation of mechanical systems—including hydraulic and pneumatic subsystems—using advanced engineering techniques and 3D CAD modelling. You'll play a key role in supporting custom CTO/ETO projects, ensuring seamless integration...

  • Design Manager

    2 weeks ago

    Fortitude Valley, Australia Talent Web Full time

    Established construction company in Fortitude Valley - Varied projects across defence, commercial and residential up to $35M - Supportive and experienced management team Are you an experienced Structural Engineer or Architect looking to make the move from consultancy into construction? TalentWeb is proud to be working with a leading construction company...