Swinburne Csiro Phd Scholarship X 4

3 weeks ago

Melbourne, Australia Swinburne University of Technology Full time

Mechanical and Product Design Engineering
- Research will be carried out at Swinburne University of Technology (Hawthorn, Melbourne, Australia) and CSIRO (Clayton, Melbourne, Australia).
- Stipend of $35,000 p.a. for 3 years with a possible 6-month scholarship extension

**About the Scholarship**

**The four scholarships offered are outlined below**:
**1. Swinburne CSIRO PhD Scholarship - The Behaviour of Gangue Minerals in Australian ores in DRI Production**
This PhD project aims to investigate the thermodynamics and kinetics of direct reduced iron (DRI) production using high-phosphorus, silica, and alumina-rich iron ores from the Pilbara region in Australia. The research will explore the complex interactions of gangue minerals during the reduction process, focusing on the formation of fayalites and low melting point aluminosilicates, which can affect metallisation and the reduction kinetics of iron.

1) Carry out systematic critical literature review of the previous and state of the art processes

2) Conduct a thermodynamic modelling of processing of Australian ores to understand the possible phases formation

3) Carry out experimental study to track the kinetics and reaction mechanism of the process. This will be supported by state of the art materials characterisation techniques.

4) Establishment of the reaction mechanism and the optimum process conditions.

5) Write papers/reports and completion of PhD thesis

**2. Swinburne CSIRO PhD Scholarship - Fundamentals of Electric Smelting of Australian Ores**
This project aims to investigate the behaviour of high-gangue Australian iron ores in Hydrogen DRI processing and subsequent Electric Smelting Furnace (ESF) treatment. It will focus on three key aspects: analysing the chemistry and properties of the produced slag, examining the effects of flux additions on slag properties for potential cement industry use, and understanding how the high gangue content in DRI influences its melting behaviour in ESFs. Through thermodynamic modelling, slag property software, and high-temperature experimentation using both idealized and industrial DRI samples, the project seeks to provide insights into optimizing these processes.

This proposed PhD project will establish phases evolution, reaction mechanism and fundamentals of electric smelting of Australian ores. The project will involve both experimental and modelling studies. In particular, the project will:
1) Carry out systematic critical literature review of the previous and state of the art processes

2) Conduct a thermodynamic modelling of processing of Australian ores to understand the possible phases formation

3) Carry out experimental study to establish the reaction mechanism of the process. This will be supported by state of the art materials characterisation techniques.

4) Establishment of the reaction mechanism and the optimum process conditions.

5) Write papers/reports and completion of PhD thesis

**3. Swinburne CSIRO PhD Scholarship 2024 - Smelting of Blackmass for Recovery of Critical Metals**
The project aims to investigate the smelting behaviour of blackmass, a complex material formed during the recycling of various battery types (LCO, LMO, NMC, LFP, NCA) that contains valuable elements like lithium, cobalt, nickel, manganese, iron, aluminium, and phosphorus. The research will focus on developing a high-temperature recycling process to recover these elements, using reduction methods involving hydrogen, metals (aluminium and magnesium), and the carbon present in blackmass. Key parameters such as temperature, oxygen partial pressure, agglomeration, and reaction time will be studied. The project will track microstructure evolution and process kinetics to understand the reduction mechanism, combining thermodynamic modelling with high-temperature experimentation and advanced materials characterization. This systematic study will start with individual battery types and progress to more complex mixed metal batteries.

This proposed PhD project will establish phases evolution, reaction mechanism and kinetic model to support the development of comprehensive high temperature recycling process of batteries. The project will involve both experimental and modelling studies. In particular, the project will:
1) Carry out systematic critical literature review of the previous and state of the art battery recycling processes

2) Conduct a thermodynamic modelling of smelting of battery materials to understand the possible phases formation

3) Carry out experimental study to track the kinetics and reaction mechanism of the process. This will be supported by state of the art materials characterisation techniques.

4) Establishment of the reaction mechanism and the optimum process conditions.

5) Write papers/reports and completion of PhD thesis

**4. Swinburne CSIRO PhD Scholarship 2024 - Thermodynamics/Kinetics of Critical Elements in Slag/Metal Reaction**
Project will investigate the distribution and kinetics of criti

  • Swinburne CSIRO PhD Scholarship x 4

    3 weeks ago

    Melbourne, Australia Swinburne Full time

    Mechanical and Product Design Engineering Research will be carried out at Swinburne University of Technology (Hawthorn, Melbourne, Australia) and CSIRO (Clayton, Melbourne, Australia). Stipend of $35,000 p.a. for 3 years with a possible 6-month scholarship extension About the Scholarship In partnership with CSIRO (Commonwealth Scientific and...

  • Swinburne Csiro Phd Scholarship X 4

    1 week ago

    Melbourne, Victoria, Australia Swinburne University of Technology Full time

    Mechanical and Product Design Engineering Research will be carried out at Swinburne University of Technology (Hawthorn, Melbourne, Australia) and CSIRO (Clayton, Melbourne, Australia). Stipend of $35,000 p.a. for 3 years with a possible 6month scholarship extensionAbout the ScholarshipThe four scholarships offered are outlined below:1. Swinburne CSIRO PhD...

  • Swinburne CSIRO PhD Scholarship x 4

    1 week ago

    Melbourne, Victoria, Australia Swinburne University of Technology Full time

    MessagesTo proceed, please enable JavaScript in your internet browser. After enabling JavaScript, you will need to close and re-open this browser window. Mechanical and Product Design Engineering Research will be carried out at Swinburne University of Technology (Hawthorn, Melbourne, Australia) and CSIRO (Clayton, Melbourne, Australia). Stipend of $35,000...

  • CSIRO PhD Scholarship x 4

    1 week ago

    Melbourne, Victoria, Australia Swinburne Full time

    Mechanical and Product Design Engineering Research will be carried out at Swinburne University of Technology (Hawthorn, Melbourne, Australia) and CSIRO (Clayton, Melbourne, Australia). Stipend of $35,000 p.a. for 3 years with a possible 6-month scholarship extension About the Scholarship In partnership with CSIRO (Commonwealth Scientific and Industrial...

  • Swinburne CSIRO PhD Scholarship x 4

    3 weeks ago

    Melbourne, Australia Swinburne University of Technology Full time

    Messages To proceed, please enable JavaScript in your internet browser. After enabling JavaScript, you will need to close and re-open this browser window. Mechanical and Product Design Engineering Research will be carried out at Swinburne University of Technology (Hawthorn, Melbourne, Australia) and CSIRO (Clayton, Melbourne, Australia). Stipend of $35,000...

  • Swinburne CSIRO PhD Scholarship x 4

    3 weeks ago

    Melbourne, Australia Swinburne University of Technology Full time

    Messages To proceed, please enable JavaScript in your internet browser. After enabling JavaScript, you will need to close and re-open this browser window. Mechanical and Product Design Engineering Research will be carried out at Swinburne University of Technology (Hawthorn, Melbourne, Australia) and CSIRO (Clayton, Melbourne, Australia). Stipend of $35,000...

  • Phd Scholarship

    1 week ago

    Melbourne, Victoria, Australia Swinburne University of Technology Full time

    CSIRO Industry PhD Program (iPhD). A three-month industry engagement component with the industry partner and co-supervisor: Infrabuild Wire Pty Limited. Full time, fixed term position located at CSIRO in Clayton, VIC and our Hawthorn campus. Incumbent may be required to travel to site (Infrabuild Wire, Mayfield, NSW) and Infrabuild's other locations in...

  • Csiro Phd Top-up Scholarship

    1 week ago

    Melbourne, Victoria, Australia CSIRO Full time

    Acknowledgement of CountryCSIRO acknowledges the Traditional Owners of the land, sea and waters, of the area that we live and work on across Australia. We acknowledge their continuing connection to their culture and pay our respects to their Elders past and present. View our vision towards reconciliation.Child SafetyCSIRO is committed to the safety and...

  • Csiro Phd Top-up Scholarship

    1 week ago

    Melbourne, Victoria, Australia CSIRO Full time

    Acknowledgement of CountryCSIRO acknowledges the Traditional Owners of the land, sea and waters, of the area that we live and work on across Australia. We acknowledge their continuing connection to their culture and pay our respects to their Elders past and present. View our vision towards reconciliation.Child SafetyCSIRO is committed to the safety and...

  • Csiro Phd Top-up Scholarship

    3 weeks ago

    Melbourne, Australia CSIRO Full time

    **Acknowledgement of Country** CSIRO acknowledges the Traditional Owners of the land, sea and waters, of the area that we live and work on across Australia. We acknowledge their continuing connection to their culture and pay our respects to their Elders past and present. View our vision towards reconciliation. **Child Safety** CSIRO is committed to the...

  • Csiro Phd Top-up Scholarship

    3 weeks ago

    Melbourne, Australia CSIRO Full time

    **Acknowledgement of Country** CSIRO acknowledges the Traditional Owners of the land, sea and waters, of the area that we live and work on across Australia. We acknowledge their continuing connection to their culture and pay our respects to their Elders past and present. View our vision towards reconciliation. **Child Safety** CSIRO is committed to the...

  • PhD Scholarships

    1 week ago

    Melbourne, Victoria, Australia Swinburne Full time

    Department of Engineering Technologies This position is currently located at the Hawthorn campus. The incumbent must be willing to travel between and work at a range of locations Stipend $41, (p.a.) for 3.5 years About the Scholarship Join the Next Generation Graduates Program, a cutting-edge cohort-based initiative aimed at fostering entrepreneurial...

  • Phd Scholarship

    2 months ago

    Melbourne, Australia Swinburne University of Technology Full time

    CSIRO Industry PhD Program (iPhD). A three-month industry engagement component with the industry partner and co-supervisor: Infrabuild Wire Pty Limited. - Full time, fixed term position located at CSIRO in Clayton, VIC and our Hawthorn campus. Incumbent may be required to travel to site (Infrabuild Wire, Mayfield, NSW) and Infrabuild’s other locations in...

  • Phd Scholarship

    2 months ago

    Melbourne, Australia Swinburne University of Technology Full time

    CSIRO Industry PhD Program (iPhD). A three-month industry engagement component with the industry partner and co-supervisor: Infrabuild Wire Pty Limited. - Full time, fixed term position located at CSIRO in Clayton, VIC and our Hawthorn campus. Incumbent may be required to travel to site (Infrabuild Wire, Mayfield, NSW) and Infrabuild’s other locations in...

  • Phd Scholarship

    3 weeks ago

    Melbourne, Australia Swinburne University of Technology Full time

    CSIRO Industry PhD Program (iPhD). A three-month industry engagement component with the industry partner and co-supervisor: Infrabuild Wire Pty Limited. - Full time, fixed term position located at CSIRO in Clayton, VIC and our Hawthorn campus. Incumbent may be required to travel to site (Infrabuild Wire, Mayfield, NSW) and Infrabuild’s other locations in...

  • Phd Scholarship

    2 weeks ago

    Melbourne, Australia Swinburne University of Technology Full time

    CSIRO Industry PhD Program (iPhD). A three-month industry engagement component with the industry partner and co-supervisor: Infrabuild Wire Pty Limited. - Full time, fixed term position located at CSIRO in Clayton, VIC and our Hawthorn campus. Incumbent may be required to travel to site (Infrabuild Wire, Mayfield, NSW) and Infrabuild’s other locations in...

  • Phd Scholarship

    4 weeks ago

    Melbourne, Australia Swinburne University of Technology Full time

    CSIRO Industry PhD Program (iPhD). A three-month industry engagement component with the industry partner and co-supervisor: Infrabuild Wire Pty Limited. - Full time, fixed term position located at CSIRO in Clayton, VIC and our Hawthorn campus. Incumbent may be required to travel to site (Infrabuild Wire, Mayfield, NSW) and Infrabuild’s other locations in...

  • Phd Scholarship

    4 weeks ago

    Melbourne, Australia Swinburne University of Technology Full time

    CSIRO Industry PhD Program (iPhD). A three-month industry engagement component with the industry partner and co-supervisor: Infrabuild Wire Pty Limited. - Full time, fixed term position located at CSIRO in Clayton, VIC and our Hawthorn campus. Incumbent may be required to travel to site (Infrabuild Wire, Mayfield, NSW) and Infrabuild’s other locations in...

  • PhD Scholarship

    1 week ago

    Melbourne, Victoria, Australia Swinburne Full time

    Centre for Quantum and Technology Theory Full-time, fixed term position at our Hawthorn campus Stipend of $33,500 p.a. About the Scholarship We are seeking a PhD student to join an ongoing project funded by the Australian Research Council, under the supervision of Prof. Xia-Ji Liu. The research will be conducted at the Centre for Quantum Technology...

  • Phd Scholarship

    1 week ago

    Melbourne, Victoria, Australia Swinburne University of Technology Full time

    Swinburne Design Factory / nandin Innovation Centre Full time, fixed term position at nandin Innovation Centre (Lucas Heights, Sydney, NSW) PhD opportunity as part of the joint DFM-ANSTO Applied Innovation PhD programAbout the OpportunitySwinburne's Design Factory Melbourne (DFM) and the nandin Innovation Centre at Australian Nuclear Science and Technology...